I’m a sucker for Adeptus Titanicus, I haven’t had a game in ages, and yet here I am buying the new toys – so much for ‘paint what you have before buying more’, a January resolution. Although I do have some things on ebay at the moment, so that counts right? 😉
The Ordo Sinister Warlord Psi Titan is available direct from Forgeworld, it consists of a Warlord Titan with Sunfury Plasma Annihiliator and Power Claw plastic kit (this one) and a resin upgrade kit. The resin upgrade kit consists of head, weapon arm, and carapace gubbins. The Titan also comes with its own terminal (made of thin card) and weapon cards (also thin card).
At first I was a little disappointed that the terminal and weapon cards were of thin card stock. However after a bit of thought, maybe this isn’t a bad thing. The terminal being made of thin card means i could easily stick some metallic sheet to the back (I think this is what I have bought in the past) and the magnetised tokens should still be able to stick to the terminal, without the chore of putting magnets in the thicker terminal’s holes – the biggest advantage being the lack of polarity issues! My weapon cards go in sleeves glued to the front of the terminals, so I guess them being ever so slightly thinner doesn’t matter at all.
I have to say I really like the instruction pamphlet. It is really clear and easy to understand.
I pre-orderd the Titan and before it even arrived I started building the base. I want the Psi Titan to be stalking through a ruined city-scape. I got out one of the Titanicus Civitas Building sprues and my old Epic Armageddon buildings to see if i could create some ruins on my Titan’s base. I also got various other building materials, plasticard sheet/strip, cork, sandpaper, etc.
I created some different textures on the base by using sandpaer, plasticard, and cork sheet. You can create some interest on the base just by varying the textures, and the relative heights of the textured sheet.
I also chopped up some buildings/ruins to create ruins that fit the base better. I wanted the Titan to be stepping on one building, so I used the single story squat building from the Civitas building sprue as the basis for the building to be crushed under foot. The Epic ruins were cut up to make the ruin fit the available space on the other side of the base. Now at this point I had not received the Psi Titan, however I did have a Warlord Titan still on sprue, so I started building that one to make sure there was room on the base to attach the feet.
As I had started using the Warlord that I already owned, I could make sure my buildings would fit around the Warlord’s feet. I could also try to ensure that the crushed building did actually look like it was being stepped on by the Titan. I even gently bent the foremost toe of the Titan’s foot slightly to be in contact with the building. I did this by scoring the underside of the toe joint till I was able to bend the toe at the joint – I did the bending very carefully!
The buildings were glued into place after dry fitting all the pieces. Placing both buildings and the Titan feet on the base to ensure everything fitted OK. The buildings then had scrap cork, plasticard, and pieces of the chopped up building glued around them like fallen masonry. I also used some basing sand and some bicarbonate of soda glued down to represent smaller debris scattered around.
This is the current base and the Warlord’s Titan legs positioned (with Blu-Tac) to demonstrate the hopeful end result.
Hopefully the next post will have a fully assembled Titan… soon!